If you’re looking to add a touch of elegance and sophistication to your home, then fitting herringbone laminate flooring is a great option. This type of flooring is not only stylish but also durable and easy to maintain. In this guide, we will take you through the step-by-step process of fitting herringbone laminate flooring.
Step 1: Measure the Room
Before you start installing your new flooring, you need to measure the room where it will be installed. Calculate the square footage by multiplying the length by the width of the room. It’s important to purchase enough flooring material, including an additional 10% for waste.
Step 2: Prepare the Subfloor
The subfloor should be clean, level, and dry before installing laminate flooring. Remove any old carpet or debris from the floor and fill in any cracks or holes with a leveling compound. Use a moisture meter to ensure that there is no excess moisture on your subfloor.
Step 3: Lay Down Underlayment
Lay down underlayment over your subfloor before starting installation. This helps reduce noise and provides insulation. Cut it into pieces that fit snugly together and tape them down with duct tape.
Step 4: Start Laying Your First Row
Start laying your first row along one wall of the room with tongue side facing outwards. Leave a gap of around half an inch between the wall and first row for expansion purposes. Use spacers to keep each plank at equal distance from one another.
Step 5: Continue With Herringbone Pattern
Continue laying down planks in a herringbone pattern until you have reached the end of your first row. Make sure each plank fits tightly against its neighbor without gaps or overlaps.
Step 6: Cut Planks To Fit The Edges Of The Room
Cut planks using a jigsaw or saw so they fit precisely around edges such as doorways, closets, etc.
Step 7: Finishing Touches
Once all planks are installed, remove spacers from between them and install baseboards around edges for finishing touches.
That’s it! By following these steps carefully, you can easily install herringbone laminate flooring in your home without any hassle.
Helpful tips to keep in mind while fitting herringbone laminate flooring:
1. Always purchase extra material, around 10% more than what you need, to account for any waste or errors.
2. Make sure the subfloor is clean, level and dry before laying down underlayment.
3. Use a moisture meter to ensure that there is no excess moisture on your subfloor.
4. Start installing planks with tongue side facing outwards and leave a gap of around half an inch between the wall and first row for expansion purposes.
5. Use spacers to keep each plank at equal distance from one another.
6. Cut planks carefully using a jigsaw or saw so they fit precisely around edges such as doorways, closets, etc.
7. Remove spacers once all planks are installed and install baseboards around edges for finishing touches.
8. Take your time and be patient while installing herringbone laminate flooring as it requires precision and attention to detail.
By following these tips along with the step-by-step guide provided above, you can successfully install herringbone laminate flooring in your home with ease!
